The Standard Series consists of a family of cable extension linear position and linear velocity transducers in a NEMA 1 (IP-40) housing. The transducer mechanism is housed inside of an aluminum cover and attached to an anodized aluminum baseplate with four mounting holes.
The measurement range determines which of three housing sizes is to be used. All of the possible UniMeasure analog and digital position outputs are offered in the Standard Series.
The wire rope exit is perpendicular to the baseplate as shown in the photo but optional side and bottom wire rope exit locations are available. Other options include nylon jacketed wire rope, dust wiper, terminal strip, non-standard potentiometer, and alternate connector location.
PA Series - Analog Position
PB Series - Analog Position
Ratiometric output voltage from a precision potentiometer configured
in a voltage divider circuit. Requires regulated input voltage up to
25 V maximum.
Precision potentiometer in bridge circuit with integral zero and span
controls which facilitate interfacing to a bridge amplifier. Requires
regulated input voltage up to 25 V maximum.
Loop powered 4 to 20 mA current transmitter with adjustable zero
and span controls. Input voltage is 12V to 35V depending upon total
loop impedance.
Provides a 0 to 10 VDC or 0 to 5 VDC voltage output. Includes
adjustable zero and span controls. Requires input voltage of 11 to
35 VDC (unregulated acceptable).
Provides a -10 VDC to +10 VDC or -5 VDC to +5 VDC voltage output
with adjustable zero and span controls. Requires +15V, -15V and
Common input. Single input voltages optionally available.
Digital, TTL level, two channel square wave output signal. 5 VDC
input voltage. Optional configurations include 8 to 28 VDC, current
sinking, push-pull & line driver capability
Ratiometric output voltage from a precision potentiometer configured
in a voltage divider circuit. Requires regulated input voltage up to
25 V maximum.
Ratiometric output votage from a precision potentiometer configured
in a voltage divider circuit. Requires regulated input voltage up to
25 V maximum.
Specifications